pierpaoli ekos Limescale Remover for Irons, 250 ml

Limescale deposits can affect the steam performance of your iron - and who wants ironing to take longer than necessary?
This descaler uses natural, vegan lactic acid to remove pesky limescale deposits from the various parts of your iron! It frees the tank and steam holes from limescale without leaving any residue, improving the performance of your iron.
The descaler is 100% natural and contains no phosphoric acid so it is easily biodegradable - providing the best cleaning results with the least environmental impact.

• For traditional irons & irons with an external tank
• Naturally effective
• Biodegradable
• Vegan
• Free from phosphoric acid
• Packaging made from 75% recycled plastic
• Eco-friendly formula

Directions for use:

• Iron with an external tank:
  • Use 80 ml of descaler for tanks with a filling volume of about 1.5 L.
  • Pour it into the tank and fill up the rest with clean water.
  • Leave the solution to act for about 15 minutes and then empty the tank through the water inlet opening without turning on the iron.
• Iron without an external tank:
  • For conventional irons with a tank capacity of about 250 ml, add 20 ml of descaler to the tank and fill up with clean water.
  • Leave the solution to act for 15 minutes.
  • Then turn on the iron, select a low temperature setting, and allow the descaling solution to expel through the steam holes for about a minute.
  • Finally, empty the remaining liquid through the water inlet opening by turning the iron upside down.

Please note:

• Not suitable for irons with an aluminium plate.
• When removing limescale from irons with an external tank, also pay attention to the information provided by the manufacturer.